Installing a glass shower door on a tub is a relatively easy DIY project, but there are some important steps that must be taken to ensure the job is done properly. In this article, we’ll cover all the steps you need to take to successfully install a glass shower door on your tub.
Things You’ll Need
Before you begin the installation process, make sure you have all the necessary items. You’ll need:
- Glass shower door
- Tub
- Drill
- Drill bits
- Screwdriver
- Tape measure
- Level
- Silicone sealant
- Caulk gun
- Screws
- Anchors (if needed)
Steps To Install A Glass Shower Door On A Tub
- Measure the width and height of the tub. Make sure to measure from wall to wall, and from floor to ceiling. This will help you determine the size of the door you need to buy.
- Once you’ve purchased the proper size door, lay it on the floor and make sure all the pieces are accounted for. There should be hinges, screws, anchors, and a frame.
- Find the studs in the wall and mark them with a pencil. This will ensure that you are drilling into them and not into the drywall.
- Using a drill and the appropriate bit, drill holes into the studs. Make sure the holes are deep enough for the anchors to fit.
- Place the anchors into the drilled holes and use a screwdriver to secure them.
- Place the frame around the tub, making sure it’s level. Secure it to the wall with screws.
- Place the door onto the frame and secure it with screws.
- Using a caulk gun, apply silicone sealant around the frame and door.
- Allow the sealant to dry for 24-48 hours before using the door.
Conclusion
Installing a glass shower door on your tub is a relatively easy DIY project if you have the right materials and follow the steps outlined above. Just make sure to take the proper measurements and use the right tools, and you’ll be enjoying your new shower door in no time.
Related Posts
